Recommended products

Quick inquiry

Lastest news:

Máy Dệt Kiếm Picanol Gammax

Click images below to view the larger images

Product name: Máy Dệt Kiếm Picanol Gammax

Product group: Máy dệt thoi ( ngang )
Proposal: 08- 07-2012
Manufactural: Picanol - Bi
Machine type: Gammax
Details:
96 MÁY DỆT KIẾM PICANOL GAMMAX Type: GamMaX-8-R-190CM with Staubli 2670 Electronic Dobby (20 harness drives) 2006year 48 machines B> Type: GamMaX-8-R-190CM with Staubli 2861 Electronic Dobby (24 harness drives) 2006year 16 machines C> Type: GamMaX-8-R-190CM (Fancy Beam) with Staubli 2670 Electronic Dobby (20 harness drives) 2006year 16 machines D> Type: GamMaX-8-R-190CM (Fancy Beam) with Staubli 2861 Electronic Dobby (24 harness drives) 2006year 16 machines Technical Specifications Reed Width: 190cm Performance: Filling insertion rates upto 1500m/min Filling Selection: 8 Colors (filling presenter with insertion control) Filling Detection/Insertion: Piezo-Electronic 8-channels, with Prewinder switch-off system (PSO) Reed Motion: Positive cam and cam followers in both frames Shedding Motion: Electronic Dobby for 20 and 24 frames (refer above) Let-Off Motion: Load-cell controlled warp-let off system (ELO) Warp beam: 805mm flange diameter, 216mm barrel dia., with button holes Machine Drive: Sumo main motor with direct machine drive, OPTISPEED Voltage: 380V/50Hz Backrest: Feeler roll / whip roll / warp tension measuring Cloth take-up: Electronically controlled take-up system (ETU), 580mm dia., rubber covered. Double press-roller. Selvedge motion: Independently electronically controlled (ELSY), 3ends split LHS/RHS Harness Frames: SCHMEING, Type TEX, 16pcs with DRC2 for heald length 15inches Warp stop motion: 6 bar electrical 25mm pitch Pick finding: Automatic pickfinding and closed shed positioning Weft supply: 2 vertical bobbin rack for 6 bobbin each dia. 450mm Machine Controls: LCD Screen, Push buttons on front panel Lubrication: By forced circulation of filtered oil. Grouped grease points for manual lubrication. Sealed bearings for the beat-up shaft, to prevent the lubrication grease drying out. MicroProcessor Controlled, centralized grease lubrication for bearings of the beat-up shaft and harness motion mechanism. Monitoring: Self-diagnosis. Stop distribution reporting. Safety: Light curtain. Protection guard over take-up rollers. Water-Cooling On all machines Inclusive of: 1.5pcs warp beams, 1.5pcs cloth rollers, 16 heald frames, and 7000 heald wires and droppers. * All remaining spare parts related to GamMaX model Picanol machines would be included and provided.